RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050110 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75597 2.REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER LH (w/o Roof Rack)

HINT:

Use the same procedure for both roof drip side finish moulding joint covers.


a.
B338483
1.354,1.854 1.865,1.854 1.865,1.854 1.865,1.365 true 1.167,1.771 1.479,1.969 0.313,0.198 10 *1
*1
*1 Protective Tape


Put protective tape around the roof drip side finish moulding joint cover LH.


b.

Using moulding remover D, detach the clip and claw and remove the roof drip side finish moulding joint cover LH.


Hide 75552E 3.REMOVE ROOF DRIP SIDE FINISH MOULDING LH

HINT:

When removing the roof drip side finish moulding, heat the vehicle body and roof drip side finish moulding using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Roof Drip Side Finish Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or roof drip side finish moulding excessively.


a.
B338484
2.031,1.729 1.802,1.729 1.802,1.729 1.802,1.24 true 2.104,1.656 2.417,1.854 0.313,0.198 10 *1
*1
*1 Protective Tape


Put protective tape around the roof drip side finish moulding LH.


b.

Using moulding remover D, detach the clip and remove the roof drip side finish moulding LH.

NOTICE:
·

When removing the roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clips.

·

If a roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.




Hide 75558C 4.REMOVE CENTER NO. 2 ROOF DRIP SIDE FINISH MOULDING LH

B338486
1.646,1.469 1.646,1.865 1.646,1.865 1.938,1.865 true 2.01,1.792 2.323,1.99 0.313,0.198 10 *1
*1
*1 Protective Tape


a.

Put protective tape around the center No. 2 roof drip side finish moulding LH.


b.

Using moulding remover D, remove the center No. 2 roof drip side finish moulding LH.


Hide 75554A 5.REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH

HINT:

When removing the rear roof drip side finish moulding, heat the vehicle body and rear roof drip side finish moulding using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Roof Drip Side Finish Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or rear roof drip side finish moulding excessively.


a.
B338487
1.854,1.458 1.854,1.74 1.854,1.74 2.052,1.74 true 2.146,1.656 2.458,1.854 0.313,0.198 10 *1
*1
*1 Protective Tape


Put protective tape around the rear roof drip side finish moulding LH.


b.

Using moulding remover D, detach the clip and remove the rear roof drip side finish moulding LH.

NOTICE:
·

When removing the rear roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clips.

·

If a roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.




Hide 75561A 6.REMOVE ROOF DRIP SIDE FINISH MOULDING CLIP (for Front Side)

B338485

HINT:

Perform the following procedures if replacing a roof drip side finish moulding clip.


a.

Using a heat light, heat the clip and vehicle body.

NOTICE:

Do not heat the clip and vehicle body excessively.



b.

Remove the roof drip side finish moulding clip.


Hide 75561A 7.REMOVE ROOF DRIP SIDE FINISH MOULDING CLIP (for Rear Side)

B338488

HINT:

Perform the following procedures if replacing a roof drip side finish moulding clip.


a.

Using a heat light, heat the clip and vehicle body.

NOTICE:

Do not heat the clip and vehicle bodyexcessively.



b.

Remove the roof drip side finish moulding clip.


Hide 63185D 8.REMOVE FRONT ROOF RACK BRACKET (w/o Roof Rack)

B338489

a.

Remove the 2 bolts and front roof rack bracket.


Hide 63187A 9.REMOVE REAR ROOF RACK BRACKET (w/o Roof Rack)

B338490

a.

Remove the 2 bolts and rear roof rack bracket.